Ferromagnetic power supply modules – Pak PL70B

IP44-IK08 - Class 2
  •   Plastified aluzinc junction box (class 2).
  •   Ferromagnetic control gears 400/250W.
  •   Types of lamps: HPS
  •   Power supply: 2 lamps.
  •   Control gear mounted on a removable plate (electronic ballast and  capacitor).
  •   Protection against short-circuits and terminal blocks for netword cables and lamp cable outputs.



  •   Pre-wired junction box ready to install in lammpost bases.
  •   Metal box, better for heat dissipation and rigidity.
  •   Two independent covers for easy opening inside the mast.
  •   Fixed on horizontal mounting rail.
More information

More information

Casing : •

  • Weldless aluzinc junction boxes (patented process): 6 times more resistant to corrosion than galvanised sheet. 
  • High temperature plastified insulating coating offrets high-adhesion UV protection and will not separate if scratched.
  • LCIE Class 2-approved for internal insulation. 
  • Open sides and rigid base to make connection easier.
  • Removable component for easy maintenance.
  • Protective cone and hose clamps to allow frontal insert and maintaining of the power cables.

Technical specifications

Technical specification: •

  • Anti-UV plastification: 0.35mm/side.
  • Dielectric strenght : 5kV/side (LCIE report No. 295.173)
  • •IP44 – IK > 08. 
  • Cover closed by means of a captive plastic screw (1/4-turn).
  • •From -40°C to +115°C
  • Open sides and rigid base to make connection easier.
  • Protective cone to allow frontal insert of the power cables.
  • Pre-wiring box with siliconized, high temperature wires.…

Dimensions : •

  • Width : 125mm
  • Depth : 110mm
  • Inscribed square : 125mm x 110mm
  • Access cover minimum width : 130mm
  • Total box +  protective cone length : 755mm + 70mm
  • Two rail of 71.5mm and 140mm
  • Three fixing bracket located 40mm, 200 and 300mm away from the top of the pole for horizontal barcket
  • Vertical rail possible (please consult us) 


            Network cable:

  • Up to 2 cables 5x35mm²
  • Other configurations please see technical specification

           Lamp cable outputs:

  • Maximum two output 2x10mm²